| Imaging Products from Data Translation
USA |
| PCI Data Aquisition Boards |
|
|
| Analog Output, Digital I/O |
|
| These low-cost analog output and digital I/O boards are ideal for applications requiring multiple D/A outputs and control capabilities. |
| High-quality, low-cost analog output card with digital I/O includes interrupt on change. |
|
| |
|
DT300 Series Low Cost |
| Multifunction |
DT300 Series boards deliver high-quality, low-cost PCI data acquisition with the flexibility of six different versions to match your needs. Each board contains 16SE/8DI analog inputs, 23 digital I/O lines, and four counter/timers. Options include 12- and 16-bit analog inputs and analog outputs.
Darca Secure is designed specifically for the Pharmaceutical market and is designed in line with the recommendations as prescribed in FDA 21 CFR Part 11.
The DT300 Series — a family of low-price, multifunction PCI bus-mastering boards. |
|
| |
|
DT3000 Series |
| High Performance Data Acquisition Board |
| The DT3000 Series are high-performance, high-channel count PCI boards that provide simultaneous A/D, D/A, and digital I/O operation at full-rated throughput. |
| The DT3000 Series are high-performance boards with high channel count and high-gain options for a wide range of challenging applications. |
|
| |
|
DT3010 Series |
| High Speed, Multifunction Data Acquisition Board |
| The WSR is a quick and accurate way of adding Eltek GenII telemetry transmitters to your existing data acquisition system. |
|
| |
|
|
DT335 |
| Digital I/O |
These low-cost digital I/O boards for the PCI bus are ideal for applications requiring control capabilities.
The DT335 provides 32 digital I/O lines and interrupt on change. |
|
| |
|
|
DT340 |
| Counter/Timer, Digital I/O |
| Ideal for applications that require automated counter/timer and control capabilities, the DT340 combines digital I/O and counter/timer functions in a single PCI slot. |
| The DT340 is a low-cost counter/timer and digital I/O board for the PCI bus. |
|
| |
|
|
DT351 |
| Optically Isolated Digital I/O |
| The DT351 is a 16-channel optically isolated digital I/O board that provides protection in noisy industrial environments. The DT351 provides channel-to-channel isolation. |
| The DT351 is an optically isolated digital I/O board for use in industrial applications. |
|
| |
|
|
DT3034 |
| High Performance, High Resolution Data Acquisition Board |
| The DT3034 is a high performance, high resolution DAQ board for the PCI bus that offers 16-bit measurements on up to 32 single-ended or 16 differential channels with a sampling rate of 500kHz. With an ENOB (Effective Number of Bits) rating of over 14.2 bits, this is the most accurate PCI board available. And the SNR (Signal-to-Noise Ratio) of 100dB provides the ultimate in clean signal measurements. The DT3034 can operate multiple subsystems simultaneously at full speed without the loss of any data. |
|
| |
|
| |
Selection Chart For PC Based Data Aquisition System  |
| |
|
