- 50 kHz sampling rate, or simultaneous sampling at up to 6x 800 kS/s
- 10/12/16-bit resolution
- High Input Impedance for accurate measurements
- Digital I/O Modules
- Analog Output Modules
- Powered by USB
|
- 4 independent A/D converters
- most flexible input ranges
- up to 960 Hz sampling rate
- powered by USB
- 500 Volt isolation
- for ultra-accurate logging of low level low frequency voltages
|
- 2 or 4 simultaneous analog inputs
- Up to 2.0 MHz/channel
- 16-bit resolution
- Synchronous analog I/O, digital I/O and C/T
- 500 Volt isolation
|
- 6 or 12 simultaneous analog inputs
- Up to 225 kHz/channel
- 16-bit resolution
- Synchronous analog I/O, digital I/O and C/T
- 500 Volt isolation
|
- 4, simultaneous, 24-bit analog input channels
- ISO-Channel technology provides ±500 V galvanic isolation channel-to-channel for all analog input signals and to the host computer ...guarantees noise immunity
- Input gains of 1, 8, 16, and 32 with input ranges of ±10V to support the following effective ranges: ±10V, ±1.25V, ±0.625V, ±0.3125V
...allows maximum flexibility for any signal input
|
- Powered by USB.
Sampling rates up to 41.6 kS/s per channel.
- Simultaneous operation of analog input, digital I/O, counter/timer, and tachometer subsystems at throughput rates of over 830 kS/s.
- 16 Simultaneous analog input channels, 24-bit ADC/channel, input range of ±10V.
- Two 32-bit counter/timer (C/T) channels.
- One tachometer input channel.
- 16 digital I/O lines.
- ±500V galvanic isolation to prevent ground loops.
- Included software and drivers compatible with Windows XP/Vista/7.
- Available installed in a metal connection box with BNC connectors, or as a board-level OEM version.
|
- Simultaneous A/D operation with sampling rates up to 2.0MHz per channel
- All subsystems operate synchronously at 48MHz.
- 2 or 4 analog inputs, 2 waveform analog outputs, 16 digital inputs, 16 digital outputs, 2 32-bit counter timers, and 3 quadrature decoders.
- 16-bit deglitched DAC’s run at 500kS/s per channel for waveform generation.
- True USB 2.0 host interface for transferring data at rates up to 480 Mbits/second.
- 500V isolation provides low-noise measurements and protects PC.
- Ships with DT-Open Layers device drives, Ready-to- measure applications, Measure Foundry evaluation, and more. Compatible with Windows XP/Vista/7.
|
- Runs on USB Power…ideal for portable applications…no external power supply needed
- Four Simultaneous, 24-bit Delta-Sigma A/D channels for high resolution measurements with support for IEPE inputs, including use of a 4mA current source and AC or DC coupling
- Up to 105.4kHz sampling rate per channel
- Tachometer input support in the A/D data stream for synchronizing measurements
- For DT9837A modules only, support for reading analog output values in the analog input data stream, to correlate input and output values
|
