 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
|
|||||||
 |
|
||||||||||
 |
|
| Sound and Vibration Solutions | |
 |
|
TEMPpoint Ethernet (LXI) Instruments for Thermocouples |
|
| • ISO-Channel provides 1000V galvanic isolation channel-to-channel | |
| • 4 DI analog inputs | |
| • 24-bit, 52.7 kHz per channel | |
| • Analog output, tachometer, counter/timers synchronized with analog inputs | |
| • Multiple module synchronization using Wired Trigger Bus | |
| • 1U, half-rack | |
| DT9837 4 Channel Data Acquisition Module with IEPE Inputs | |
| • 4 SE analog inputs | |
| • 24-bit, 52.7 kHz per channel | |
| • analog out, tach, trigger | |
| • ready-to-run device | |
| • BNC or OEM board level | |
| • precise and cost-effective | |
 |
DT9837A 4 Channel Data Acquisition Module with IEPE Inputs |
• 4 SE analog inputs |
|
| • 24-bit, 52.7 kHz per channel | |
| • analog out, tach, trigger | |
| • ready-to-run device | |
| • BNC or OEM board level | |
| • precise and cost-effective | |
| • output sampling rate programmable up to 52.7 kKz | |
| • analog output synchronized with analog input | |
| • multiple module synchronization | |
 |
DT9841-VIB 8 Channel Data Acquisition with IEPE Inputs, DSP controlled |
| • 8 SE analog Inputs | |
| • 24-bit, 100 kHz per channel | |
| • 2 analog waveform outputs | |
| • programmable DSP for highest performance | |
| • scaleable for high channel count | |
 |
The DT9837 and DT9841-VIB are supported by dedicated sound & vibration analysis experts. The combination of hardware, software and know-how results in really valueable solutions for a broad range of applications. |
